Fuel/Emission Service Solution

Fuel/Emission Service Solution


#236-81000 - Fuel System Emissions Service Solution ESS
Replacement Parts & Accessories Below

# 236-81000

Fuel System Contamination Removal


Your sources of service revenue are dwindling. Today's new vehicles can go 100,000 miles between tune-ups. They come with platinum sparks, stainless steel exhaust systems, long-life metallic brakes, and more. Many of the components you used to repair are now maintenance-free. And the increasing number of leased vehicles - along with extend warranties - means you'll see less and less routine maintenance.
What's the answer? Vehicle Service Solutions, a system of contamination removal products that improve the performance of your customers' vehicles, even those with a few as 15,000 miles. With VSS, you can offer your customers a valuable service while providing your shop with additional revenue opportunities.
Fuel/Emission Service Solution
Loss of power, poor acceleration, poor gas mileage, rough idling and high emissions all point to a clogged fuel system. Carbon build-up occurs as a by-product of combustion in every vehicle. Other products focus on cleaning the fuel injectors tips, but carbon clogs the entire system, not just the injectors. You'll find on the intake manifold, valves and rings, electronic sensors, and even in the catalytic converter.
ESS is one-step process that solves these problems, cleaning the fuel system from the throttle body to the catalytic converter. Your customers should notice increased fuel economy and improved driveability. Emissions will typically show a reduction in pollution-often enough to pass state inspections.

FAST - The process takes only about 10 minutes! Cleaner is injected at the air intake, so there's no need to tie into the fuel rail. With other systems, you could spend as much as half an hour on set-up alone. OPERATES ON SHOP AIR - No electrical connection is necessary and you don't even need the air connection during service. Just charge the air reservoir and you have enough capacity for several jobs. READY-TO-USE CLEANER - Use on bottle of cleaner per job, injecting it directly into the air intake. There's no messy or potentially dangerous mixing of chemical with gasoline. SAFE - The unique VSS cleaner is chemically converted into carbon dioxide and water vapor which is released through the exhaust. BUILT-IN DIAGNOSTICS - Test fuel pressure, injector leak-down and engine vacuum using the large, easy-to-read gauges.
Unique one-step process cleans the entire fuel injection system:
1. Throttle body (throttle plate and idle control motor)
2. Intake runner
3. Fuel rail*
4. Inside of fuel injector*
5. Tip of fuel injector
6. Back of intake valve
7. Combustion chamber
8. Spark plug
9. O2 sensor
10. Catalytic converter
*...in just 10 minutes!*

Model 81000 Fuel/Emission Service Solution

Power Supply	Compressed Air
Weight	62 lbs. (28.12 kg)
Dimensions	41 3/4" H x 24 1/4" W x 20" D (106 cm x 61.6 cm x 50.8 cm)


Replacement Parts/Accessories:
#236-81020	ESS Process Cleaner for gasoline engines, 16 ounce (473) ml) bottle, 12 bottles per case.	$ 198.00 case
#236-81030	ESS Process Cleaner for diesel engines, 16 ounce (473 ml) bottle, 12 bottles per case.	$ 198.00 case
#236-81015	Replacement Injector Kit, 3 syringes, 10 needles.	$ 17.95
#236-81016	Replacement Misting Nozzle.	$ 28.00