Promo Kit Includes JO1050 + J20021 + J20024

Motorguard JO1050WMOT JO1050W
Promo Kit Includes JO1050 + J20021 + J20024

Product Code: MOT-JO1050W

Regular Price: $282.06

Sale Price: $188.04

Shipping Weight: 21.00 pounds

This product has not been rated yet 0 Customer reviews
Be the first to write a product review

Quantity:
Bookmark and Share

Magna Spot 1050 Entry-Plus Stud Welder Kit w/ Magna Wire and
Electrode Kit

No. MOT-JO1050W

Magna Spot 1050 Entry-Plus Stud Welder Kit w/ Magna Wire and Electrode Kit

Includes MOT-J20021 Wire Electrode Kit and MOT-J20024 16
Gauge Magna Wire
 
Magna-Spot Stud Welders:
  • The Ultimate Dent Removing Tool
  • Available in 8 Custom Kits
  • Exclusive Magna Pin System
  • Five Year Warranty
 
The Magna-Spot 1000, 1500 and 2000 series welders incorporate a new low-heat
transformer especially designed for today's high-strength steel uni-body vehicles. With
plenty of power for any job, these welders virtually eliminate "Burn-Through" that can
be a problem common to other welders.

These are unique, solid quality, U.S. manufactured products that offer world class
performance for today's collision repair professional. They are designed for instant
welding of draw pins, molding rivets and for the "shrinking" of stressed material.
Documented reports from users state a reduction in repair time without "Burn-
Through", even on the most difficult and awkward dents. These Stud Welders feature a
lightweight, ergonomic design with heavy-duty construction, low-heat transfer and the
highest level of reliability.

Now with the exclusive Magna Pin System (M.P.S.) which secures the pin in the
electrode plus provides convenient on-the-case storage of pins. The Motor Guard
Magna-Spot line is unequaled in Quality, Features, and Value. Try a Motor Guard
Magna-Spot Stud Welder today and see the difference in superior results over existing
models and methods.
 
JO1000 Welder Features:
  • Incorporates a new low-heat transformer especially designed for today`s highstrength steel uni-body vehicles.
  • Virtually eliminates "burn-through" that can be a problem common to other welders.
  • Designed for instant welding of draw pins, molding rivets and for the "shrinking" of
    stressed material.
  • Lightweight, ergonomic design with heavy-duty construction, low-heat transfer and
    the highest level of reliability.
  • Made in USA

PHYSICAL FEATURES

 

Weight: 9.5 Lbs. Lower Weight Means Less Operator Fatigue and Longer Use

 Housing: Injection Molded Engineering Thermoplastic

  • High Strength, Impact and Abrasion Resistance
  • Lighter Weight
  • Molded Case Features Comfortable, Smooth Radius on Grip

ELECTRICAL FEATURES
  • All Connections Hi-Pot Tested to 1500 Volts
  • Insulation is Vacuum Impregnated
  • Transformer Securely Mounted in Housing

 Power Cord

  • Length: 9 Feet – Eliminates Need for Extension Cords
  • Cord Rating: SJTO – Resists Sunlight, Water, Temperature and Oil

 Trigger Switch

  • Switch Rating: 20 Amp, 125/250 VAC, 1 HP @ 125 VAC
  • Enclosed, Sealed Switch with Plated Contacts
  • Silicon Switch Boot on Case to Seal Out Contaminants
  • Superior Switch Design with No Recorded Failures

 Braided Strap Conductor

  • Double Copper Strap with Tinned Conductors for Maximum Flexibility and Longest Life
  • Insulated Sheath Reduces Internal Heat
  • Field Serviceable – Quick and Easy Replacement, Although Recorded Failures are Minimal

Pin Retention System

 Magna Pin System

  • Provides Storage of Pins on Case for Increased Productivity
  • High-Temperature Polymer Clamp Holds Pin in Electrode in Any Position
  • Clamp Withstands High Current with No Change in Holding Power
  • Clamp Withstands 600 Degrees F with No Change in Holding Power
  • Polymer Clamp Remains Clean During Use as it does not Attract Metallic Particles
  • Polymer Clamp is Easily Replaceable

Draw Pins

 Measured Tensile Strength of Pins

  • 2.0mm Pin: 358 Pounds
  • 2.5mm Pin: 559 Pounds (Only 500 Pound Pin on Market)

 Measured Diameter of Pins

  • 2.0mm Pin: 1.94mm (97% of Nominal Size)
  • 2.5mm Pin: 2.46mm (98% of Nominal Size)

 Pin Resistance to Bending:  Medium


Product Warranty: Full Five-Year Warranty All Parts Guaranteed
 
J20024 Magna Wire Features:
  • Steel, copper coated corrugated wire.
  • Welded with the Magna Wire electrode, to pull out long creases evenly with the
    Magna Claw.
  • For use with the Magna-Spot 2500 Top-Pro System for standard pulls
J20021 Electrode Kit Features:
  • For welding Magna Wire with all JO1000, JO1500 and JO2000 series stud guns.
 
Kit Includes:
  • 1 Magna-Spot 1000 gun
  • 1 heavy duty slide hammer
  • 1 storage carton
  • 3 electrodes
  • 500 2.0 mm draw pins
  • Includes MOT-J20021 Wire Electrode Kit and MOT-J20024 16 Gauge Magna Wire
Magna Spot Comparison Chart

Related Item(s)

Code Name Image Price  
MOT-JO1500 Magna Spot 1500 Professional Stud Welder Kit Regular Price: $394.95
Sale Price: $263.30
MOT-JO1050 Entry Plus Magna Spot Stud Welder Kit Regular Price: $294.85
Sale Price: $196.57
MOT-J20021 Magna Wire Electrode Kit Regular Price: $58.71
Sale Price: $39.14
MOT-J20024 Magna Wire 16 Gauge 1/2 Lb. Regular Price: $38.89
Sale Price: $25.93

Customer Reviews

Average Customer Review: Not yet rated

Write an online review and share your thoughts with others.

There are no reviews