Tech 2 3646 GM Tech II Starter Kit with Candi Module
Quantity in Basket:
None
Code: OTC-3646
Price: $3,999.95
Shipping Weight: 19.45 pounds
GM Tech II Starter Kit with Candi Module
No. OTC-3646
GM Tech II Starter Kit with Candi Module
New! Now Covers GM Systems thru 2008!
Tech 2 Flash is loaded with features:
The large, easy-to-read back-lit screen is the first feature you’ll notice.
Graphic screen displays both test and graphics, and is capable of showing
nine sensors at once.
Snapshot graphing shows you any failures or glitches at a glance.
The Tech 2 Flash scanner is reprogrammable to keep pace with vehicle
and tool evolution.
RS232 communications port provides the avenue to connect future
devices to your Tech 2 Flash, such as SPS reprogramming.
GM Software
Authentic GM software in OTC’s Tech 2 Flash means you have the same
information as GM dealers.
Supports on-board diagnostics for all GM systems 1992 thru current .
The authentic GM software will provide full bi-directional control when
performing powertrain, chassis, and body diagnostics.
Store DTC, freeze-frame, and failure record for later review.
Watch the status of vehicle diagnostic tests as they run.
GM’s SPS Service Programming Systems
GM’s Service Programming System merges your Tech 2 Flash, a required PC*,
and GM’s SPS CD-ROM, and lets you reprogram controllers on ’93 and newer
GM/
reprogrammable controllers.
With your PC and the Tech 2 Flash, you will be on the receiving end of software
subscription updates via CD-ROM disks.
Now! Different service programming system products are available so you can
choose the solution that makes the most sense for your business
Vetronix Tech 2 Specifications
Dimensions
12″×6″×2″
Microprocessor
32 bit, 16 MHz
Memory
32 MB flash type II PCMCIA. Type III slot available for future expansion.
Communications
Integral RS232 communication port.
Screen
3.8″×2.8″ backlit monochrome with full graphics capability: 320×240
pixels. Displays up to 9 vehicle parameters at once.
CANdi Module for Tech 2 Flash!
An industry change in protocol from OBD II to Controller Area Network (CAN)
has begun. In order to perform diagnostics on a vehicle that uses the CAN
interface, you will need the Tech 2 Flash and a CAN diagnostic interface module.
The CANdi module connects between the Tech 2 Flash’s Diagnostic Link Cable
and the OBD adapter. Once the CANdi module is connected, it can be used on
all GM vehicle applications, even those vehicles using other platforms such as
OBD I and II. As of this printing, the following GM vehicles
utilize the CAN interface:
2003 Saturn ION
2004 Buick Rendezvous (3.6L)
2004 Cadillac SRX
2004 Cadillac XLR
2004 Cadillac CTS (3.6L)
2004 Chevy Malibu (Body/chassis only)
Other GM vehicles may also adopt the CAN protocol
in the future.
