Brake Tire and Wheel 6585 New Heavy Duty Strutamer W/O Stand
Quantity in Basket:
None
Code: OTC-6585
Price: $480.30
Shipping Weight: 65.50 pounds
Strut Tamer Elite HD Without Stand
No. OTC-6585
Strut Tamer Elite HD Without Stand
Simply the most effective compressor for
virtually
any straight, conical, or offset spring.
StrutTamer Elite HD, designed specifically for the new large, tightly wound springs
found on the Ford F-150, Chevrolet CK trucks, Nissan Armada and others.
OTC’s StrutTamer Elite for strut springs. This is simply the most effective compressor
for handling virtually any straight, conical, or offset spring. With its adjustable arms
and four-point locking jaws, the StrutTamer Elite securely holds the spring in place.
To keep the strut assembly straight during compression, we’ve developed a center
screw that floats from side-toside. This way the strut and spring remain aligned – no
matter what condition the spring is in. The StrutTamer Elite also features a 3-bar
handle crank design that compresses the spring faster and easier. The StrutTamer
Elite can easily be mounted to the wall without the need for adapters, or you can
choose the optional stand.
The OTC StrutTamer Elite stand features steel frame construction with two wheels
that allow you to easily tilt the stand back and move the entire unit to the work area.
To keep it firmly in place during compression, the wheels lift off the floor, and four noslip
rubber pads keep the stand firmly in place during operation.
The stand is narrower for easier mobility between vehicles in the shop.
Features:
Four-point locking jaws securely hold the spring in place.
Open-ended design means you can take the strut in & out, quickly & easily.
The arms adjust in and out, accepting many different sizes of springs
The arms adjust up and down, accepting many sizes of springs
The 3-bar handle allows easy compression & decompression of the spring.
No need to change shoes for different size springs.
When used on the optional stand, it is very portable.
